Mochini o Ikemetseng oa ho Slitting, o Seha Lithapo Hantle ka ho Sebelisa Li-Slitting Blades

Tlhaloso ea Lisebelisoa

(Mekhahlelo ea Mochini oa Slitting e ka etsoa ka mokhoa o ikhethileng ho latela litlhoko tsa bareki)

Mochini oa Slitting
1. Sebopeho sa 'Mele oa Mochini: E kopantsoe ka ho feletseng le ho fokotsa khatello ea kelello. E na le lipoleiti tse tharo tse kholo tse tlase tsa 30mm bakeng sa botsitso bo ntlafalitsoeng.

2. Moqapi oa Shock Absorption: 'Mele oa mochine o entsoeng ka likou tse bulehileng bakeng sa ho eketsa lisebelisoa tse senyang tšabo; enjene le slitting mainframe tse arohaneng, tse hokahaneng ka manonyeletso a bokahohle.

3. Moralo oa Shaft: E tsitsitse shaft e tlase; manual lift machine o khanna shaft e ka holimo. The arch e tsamaisoang e behiloe holim'a li-slide tsa linear bakeng sa ho tlosoa ka letsoho, ho thusa phetoho ea lisebelisoa.

4. Shaft Material le Kalafo: Li-shafts tse ka tlaase le tse ka holimo tse entsoeng ka 42CrMn forgings, tse tlas'a phekolo ea ho tima, ka boima ba holimo ba HRC52-57. Shaft bophara ke Φ120mm (+0 kapa -0.03mm), ka bolelele bo sebetsang ba 1300mm.

5. Mokhoa oa ho khanna: AC 7.5Kw motlakase o laoloang ka lebelo le fapaneng o khanna ka tlaase, ka lebelo le feto-fetohang la 0-120 rpm. Shaft e ka holimo e tsamaisoang ke phetiso ea lisebelisoa.

6. Lower Spindle Height: 800mm.

7. Ho Nepaha ha Shaft:
- Shaft Concentricity: E lekantsoe ka matšoao a mararo (ka ho le letšehali, bohareng, ka ho le letona), ka mamello ea ± 0.01mm (karolo e ka tlaase ea shaft, e ka holimo ea shaft ea bobeli).
- Shaft Parallelism: Mahlakore a ka ho le letšehali le ka ho le letona a kentsoe ka li-blades tse ka holimo le tse tlase tse lekanang, a lokisoa ka li-gauge tsa feeler. Tsepamiso ea mantlha ea ho lokisa shaft e kaholimo, ka mamello ea ± 0.01mm.
- Shaft Side Parallelism: E lekantsoe ka matšoao ho netefatsa boemo bo nepahetseng ba shaft, ka mamello ea ± 0.005mm.

8. Li-blades: Khothaletsa tšebeliso ea lisebelisoa tse thata tsa alloy tse thata tse fihlang HRA90-95. Motsoako o ntlafalitsoeng oa li-blades le li-spacers ho kopana le litlhaloso tsa slitting. (Li-blades le li-spacers ha li kenyelelitsoe lisebelisoa; ho itšetlehile ka lipuisano tse arohaneng ho latela litlhoko tsa bareki.)

Edge Recoiler

1. Drive System: Recoiler e khannoang ke koloi ea Torque e tsoang ho brand ea Shunda (tension motor) ho etsa bonnete ba hore mokhoa o tsitsitseng oa ho kopanya.

 2. Sesebelisoa sa ho lahla: Sesebelisoa sa ho lahla se laoloang ke motlakase le mochine oa ho fetola maqhubu ho netefatsa ho ajoa ka mokhoa o ts'oanang oa lisebelisoa tsa li-coil, ho netefatsa hore ho tsosolosoa ka katleho ha lisebelisoa tsa bohale.

3. Moqomo oa Cage: E entsoe ka moropa oa cage bakeng sa ts'ebetso e bonolo le e potlakileng ea ho laolla.

4. Ho Kena le ho Tsoa Borokho: Ho kena le ho tsoa marokho a laoloang ke lienjene.

5. Bokaho ba Borokho: E koahetsoe ka lipoleiti tse 8mm tse teteaneng tsa tšepe tse sa hloekang bakeng sa khanyetso e eketsehileng le ho hloekisa habonolo.

6. Moralo oa Roller Shaft: E sebelisa li-roller shafts tse thata tse thata tse nang le electroplating e teteaneng bakeng sa ho eketseha ha khanyetso le bophelo ba tšebeletso.

I.Likarolo
1. E na le moralo o hlophisitsoeng hantle, o ikemetseng o feletseng, le ts'ebetso e ke keng ea lekanngoa, tlhahiso, ho nepahala, le boleng, mohala oa rona oa ho senya o tiisa ts'ebetso e se nang moeli ka ts'ebetso e tsitsitseng le taolo e bonolo ea basebelisi.
2. Ho sebelisa mokhoa o tsoetseng pele oa taolo oa Mitsubishi PLC, mohala oa rona oa ho seha o nolofalletsa taolo e nepahetseng ea lefats'e bakeng sa ts'ebetso e nepahetseng.
3. Mekhoa ea boikhethelo ea CPC & EPC e teng bakeng sa ho ntlafatsa ho qhekella le ho nepahala, ho fana ka phetoho e eketsehileng ho finyella litlhoko tse itseng.
4. Ho hlomelloa ka mokhoa o ka tšeptjoang oa hydraulic system, sebopeho se matla, le litlhophiso tse utloahalang tsa sebaka, mohala oa rona oa slitting o fana ka mokhoa o bonolo le o sebetsang, o tiisang ho tšepahala le botsitso ts'ebetsong.

Ⅱ .Likarolo tse ka Sehloohong

1. Koloi ea li-coil

2. Uncoiler

3. Sesebelisoa sa ho pinching, Mochine o otlollang le oa ho kuta

4. Looper

5. Tataiso ea lehlakore

6. Mochini oa ho senya

7. Recoiler (mahlakoreng ka bobeli)

8. Looper

9. Sesebelisoa sa ho arohana le tsitsipano

10. Recoiler

11. Ho laolla koloi bakeng sa recoiler

12. Haeteroliki tsamaiso

13. Sistimi ea moea

14. Mokhoa oa ho laola motlakase

Ⅲ .Ts'ebetso ea tekheniki

Koloi ea khola → ho khoasolla → ho penta, ho otlolla le ho seha hlooho → looper → tataiso → ho petsola → ho tsoelipana ka mahlakoreng → looper → ho arola lintho pele, tsitsipano → ho theola koloi → ho theola koloi

Ⅴ.Parameter

TLHOKOMELISO: Mochini o ka hlakoloa ho latela tlhoko e khethehileng ea moreki, lintlha tse kaholimo bakeng sa litšupiso feela.